Free mailboxes of TUT.BY users are hosted on the Yandex.Mail platform. The volume of the mailbox is not limited.
Email users are provided with:
There are three ways to restore: through a backup address, SMS, or answering a security question.
Please note that it is impossible to change the password using Yandex tools: all operations with passwords are carried out only on TUT.BY.
If you have chosen more than one recovery method, then any of these methods can be deleted. After deleting the answer to the security question, this recovery method becomes unavailable in the future, while the backup address and phone number can be re-linked to the account after deletion. Each postal address can be used as a backup for only one TUT.BY account. Similarly: each phone number can only be linked to one account.
The technical support service of the portal also does not develop software and never sends programs to users. In no case do not run the files attached to such letters and do not follow the links (especially if the files are archived) - these are dangerous viruses.
If you received such a suspicious letter from any of the addresses in the format [email protected], please report it to [email protected] so that we can block the sender's account.
The only difference is: TUT.BY users in the " Username" indicate not just a login, but full mailbox address, in the format [email protected].
If all settings are specified, and the mail program does not receive or send letters, you can contact for help at [email protected]– attach screenshots of the settings and the window with the error message to the letter.
The only difference is that in the "Username" field you will need to enter the mailbox address in the format [email protected]. Of the two possible incoming mail protocols, we recommend choosing IMAP.
In addition, on mobile devices, you can also work with mail through the web interface (login from the page https://mail.tut.by).
The ability to set avatars on Yandex.Mail for TUT.BY users, unfortunately, is not provided. Sometimes, user photos are added to the lines with sent letters, selected based on the results of automatic processing of social network data. If you find an error (that is, the sender does not display your avatar), you can contact Yandex support via the feedback form at https://yandex.ru/support/mail-new/web/preferences/about- sender-form.html#about-sender-form .
Belarusian portal Tut.by offers to use free mail with a domain located in the national zone of Belarus .by- and today this free service is the leader among free mail services in Belarus. Of course, it is worth noting that the registration of users with free mailboxes is open not only to residents of this wonderful country, but to all Internet users without restrictions. By registering on the portal, you will not only get the opportunity to use the created free mailbox, but also get the opportunity to participate in portal projects: jobs.tut.by, dating on love.tut.by, catalog.tut.by resource catalog and TUT.BY forums.Create a free "Belarusian" (.by) mailbox: http://profile.tut.by/
The generated email address will have the following parameters:
Inbox server POP3:
mail.tut.by(port 110)
Outgoing server SMTP: mail.tut.by(25 or 2525)
Server IMAP4: mail.tut.by
Username: The user ID you entered during registration
Password your password
SMTP authentication Enabled in "As incoming mail server" mode
In 2015, the popular Belarusian portal TYT.BY switched to using the Yandex mail service, as a result of which the owners of iOS devices experienced some discomfort, as they had to reconfigure the mail client.
Unfortunately, the setup does not go through automatically, as is the case with Gmail. The problem is exacerbated by the fact that during setup you will need to manually enter the addresses of POP and SMPT servers, as well as complete the registration process on the site itself. At the same time, this trouble applies to all users of the resource - both existing and new. In the instructions below, we will describe in detail the procedure for setting up TUT.BY mail on iPhone and iPad.
1 . Go to the TUT.BY website in a browser on a computer, smartphone or tablet, enter your login and password, click "Mail".
The resource will automatically redirect you to the registration completion page, where you need to enter additional account information. Fill in the required fields and click Complete registration.
2 . Go to the Yandex.Mail web interface using the link , click the gear icon in the right corner next to the account name, and select the section in the pop-up window Other.
3 . Choose a section Email programs in the column on the left.
4 . Check the boxes next to all items and click the button Save Changes.
Attention. Without performing the above steps, the correct operation of tut.by mail on iPhone and iPad may not be possible.
5 . On an iPhone or iPad, go to Settings —> Mail —> Accounts.
6 . On the next screen, select " Add account". Since the service you are looking for is not in the list of suggested services, click " Other«;
7 . By going to the section "New Account", enter your account information and click "Further". The username must be entered in full, for example [email protected]
Select Protocol IMAP or POP to further set up mail on your iPhone or iPad.
8 . Fill in all the available cells below as follows:
If you have selected the IMAP protocol:
If you have selected the POP protocol:
In case of problems, try manually setting the ports for the incoming and outgoing mail servers (in most cases it is not required):
Incoming mail (POP3):
Server name: pop.yandex.ru;
Use SSL: Yes;
Port: 995.
Outgoing mail (SMTP):
Server name: smtp.yandex.ru;
Use SSL: Yes;
Port: 465.
For users using IMAP4:
Server name: imap.yandex.ru;
Use SSL: Yes;
Port: 993.
This completes the TUT.BY mail setup on iPhone and iPad.
Domain name
Username (login): [email protected] domain name
Password: user password
In the “Outgoing mail server” tab, check the box “SMTP server requires authentication”. Also set the switch to the position: “Similar to the server for incoming mail”.
Ports used:
for normal connection:
for a secure connection:
outgoing mail (SMTP): 465
To work with your e-mail using the mail client program, you must use the following settings:
Mail server (IMAP/POP3/SMTP): domain name
Username (login): [email protected] domain name
Password: user password
The option "Use shared inbox (store mail in Local Folders)" must be unchecked.
Ports used:
for normal connection:
outgoing mail (SMTP): 2525;
incoming mail: IMAP:143, POP3: 110;
for a secure connection:
outgoing mail (SMTP): 465
incoming mail: IMAP: 993, POP3: 995.
To work with your e-mail using the mail client program, you must use the following settings:
Mail server (IMAP/POP3/SMTP): domain name
Username (login): [email protected] domain name
Password: user password
Important! After specifying the incoming and outgoing mail servers, check the box “My SMTP server requires authorization”.
After entering the username and password, clicking the “next” button, a window will appear asking you to check the rest of the mailbox properties.
Ports used:
for normal connection:
outgoing mail (SMTP): 2525;
incoming mail: IMAP:143, POP3: 110;
for a secure connection:
outgoing mail (SMTP): 465
incoming mail: IMAP: 993, POP3: 995.
Anti-spam filters may treat your message as SPAM for many reasons. This may be due to the fact that someone began to mark your emails as SPAM, due to the addition of your domain to blacklists, due to the analysis of the content of your message (try to redesign it so that it does not look like SPAM).
Also, the IP address of the server where your hosting is located can be entered in the spam lists, in which case you need to contact the technical support service.
As a rule, if for some reason the recipient cannot receive the letter, then the sender should receive a response indicating the reason for the non-delivery of the message. If, having learned the server's response, you cannot solve the problem yourself, then you need to contact the technical support service by email [email protected] website. The request must include the sender's address, the recipient's address, and the approximate time the message was sent.
It is also possible that several devices receive mail from one mailbox. And in the settings of mail clients there is an option “Delete letters from the server after receiving”.
Login to cpanel hosting control panel. In the "Mail" section, open the "MX Record" item. From the list, select the domain for which mail will be configured.
Adding a new entry:
for gmail.com/tut.by
Importance: 1
Recipient: ASPMX.L.GOOGLE.COM
for yandex.ru
Importance: 10
Recipient: MX.YANDEX.NET
Wait for the DNS records to be updated. This process can take up to 72 hours.